Download File

## 1.0.6 - Clamp cockpit HUD speed and vertical speed to zero while the occupied plane is grounded, settled, and at idle power. - Keep grounded idle physics in ground handling for a few ticks when contact flickers, preventing tiny client/server corrections from showing as movement. - Restore the -12 degree ground pose only as a client visual for an empty, settled plane after the pilot exits. ## 1.0.5 - Remove the remaining -12 degree ground model pitch so the tail no longer jumps up and down when client ground contact flickers. - Keep visual pitch tied only to the real flight pitch. ## 1.0.4 - Keep the physical/synced entity pitch at 0 degrees while taxiing on the ground. - Move the -12 degree taildragger nose-up pose into client-only visual model interpolation. - Reduce ground jitter caused by syncing a pitched vehicle pose while colliding with the ground. ## 1.0.3 - Smooth ground handling by keeping taxi movement horizontal instead of applying the nose-up pitch to the movement vector. - Allow A/D rudder input to yaw the plane on the ground even while taxiing slowly or standing still. - Stop recentering the pilot look direction while the plane is on the ground. ## 1.0.2 - Restore local client prediction for the pilot's plane so the aircraft visibly moves while the HUD reports speed. - Restore neutral centering for flight controls by gently pulling the pilot look input back to center. - Add in-flight pitch auto-leveling so pitch and roll settle back toward neutral when the pilot is not holding input. ## 1.0.1 - Smooth plane yaw by keeping flight physics server-authoritative and rendering interpolated yaw/pitch/roll on the client. - Replace instant yaw/roll changes with damped angular rates, clamped input, smoother engine response, quadratic lift, and speed-dependent drag. - Reduce redundant synced data updates for throttle, roll, and rudder.